PT1500 - 1500KG Man & Materials Hoist

Do you need to lift personnel and goods fast and safely to certain heights? Our DE JONG Man & Materials hoist from the PT1500/2000 series will offer you the optimum solution for low, medium and high rise constructions of all types.

The machines can be used for example at new building construction sites, refurbishments, chimneys, and offshore and bridge constructions. These are in the Netherlands designed and manufactured machines which are built to the highest safety standards and of course comply with the Australian standards.

The PT1500 has a payload capacity of 1500kg or 18 persons. Large advantage is that the machines can be installed without the use of an elevator pit. The machines can just be installed on a flat concrete slab. This makes them the perfect machine for installation on location where there’s no pit possible and no long entrance ramp is possible. Just a short loading ramp will be sufficient.

It can also be executed with a front load which makes it very easy to load, for example full pallets with materials, into the hoist with a forklift which will make the machine even more efficient. When you use our man and materials hoists, you can expect all of the following advantages.

Faster Construction Times

The machine is equipped with a standard cage of 220x150x219 cm. (LxWxH) but can also be executed with a cage of 3.2 m long or even 4.20m long.

Most of our customers are choosing for the biggest option the 4.2m cage. This gives them the opportunity to transport even the longest building materials with the hoist.

This means less usage of a (tower) crane on site which will be a big saving on site costs. It also allows you to get most materials safely at height even in the situation that the tower crane is out of service due to windy conditions, the hoist in most occasions will still be operational which means less downtime and faster construction times.


Due to the fact that the machine doesn’t need an elevator pit the installation is very flexible. Just a flat concrete slab will or suspended slab will be sufficient. This makes the installation of a large entrance ramp or stair to the hoist entrance unnecessary.

The base surround is installed with easy pin connections which makes installation very fast and easy. The installation of the masts can easily and safely take place from the installation platform at the side of the mast which is standard delivered. You can use the special designed electrical auxiliary lifting device to install the mast sections (optional).

The tie in distance can be up to every 12m which makes it also possible to install it on locations where less anchoring points are available.

Safety Devices

We take safety seriously. The machines are executed with a certified safety brake which will automatically activate if the lowering speed of the machine exceeds 1,2 to 1,4 the normal speed.

The machines are also standard executed with an overload device that activates if the machine is overloaded. Safety gates at floor levels will make sure all levels will be secured.


The masts of the PT1500 are interchangeable with the mast of the PT2000 and the materials hoists MP1000/1500/2000 which makes it a very profitable investment for companies who want to expand in mand and materials hoists.

Low Maintenance Costs

The frame and mast are fully hot dipped galvanized and extremely robust executed which ensures minimal maintenance costs. This helps to save your project more money in the long run.

DE JONG has chosen the option of minimal electronics in the machine and most of the functions are controlled by standard Telemecanique limit switches and contactors which are extremely reliable in all environments.

Spare Parts Available

Time on a construction site is valuable. A machine that breaks down or requires maintenance can bring construction in certain areas to a complete standstill. This is tremendously problematic for projects on a strict deadline as wasted times means losing money.

An additional advantage of working with DE JONG Hoists (Aus) is that in case of a breakdown, most parts will available in our stock but alternatively also be locally available and repairs can be done in an efficient manner by a local electrician without the need of expensive special manufactured spare parts. This means that downtime will be kept to a minimum if the machines need repairs done.

If you are interested in this machine, contact our team of specialists and let us give you the best advice for your job requirement. We work closely with you to deliver a solution that meets the needs for your project.

Call (08) 9241 6000 Or email us.

Brochure DEJONG PT1500

Payload Capacity: 1500kg. or 18 Persons
Cage dimensions (Option 1): 220 x 150 x 219 cm. (LxWxH)
(Option 2): 320 x 150 x 219 cm.      “
(Option 3): 420 x 150 x 219 cm.      “
Power requirement: 415V 3 phase 50Hz
Max mast height: 75m. (Higher on request)
Tie in distance: every 12m.
Weight basic machine*: 3150 kg appr.
Motor capacity: 2 x 7.5 kW, 2 speed
* 320x150cm cage dimension
* Approximately